Wheel torque can be calculated function of engine torque if the parameters and status of the transmission are known. In this tutorial, we are going to calculate the wheel torque and force for a given:
- engine torque
- gear ratio (of the engaged gear)
- final drive ratio (at the differential)
- (free static) wheel radius
Also, we are going to assume that there is no slip in the clutch or torque converter, the engine being mechanically linked to the wheels.
This method can be applied to any powertrain architecture (front-wheel drive or rear-wheel drive) but, for an easier understanding of the components, we are going to use a read-wheel drive (RWD) powertrain.
Image: Vehicle rear-wheel drive (RWD) powertrain diagram
As depicted in the image above, the engine is the source of torque. The gearbox is connected to the engine through the clutch (on a manual transmissions) or torque converter (on an automatic transmissions). We consider that there is absolutely no slip in the clutch (fully closed) or in the torque converter (lock-up clutch closed). In this case the engine torque Te [Nm] is equal with the clutch/torque converter torque Tc [Nm].
\[T_c = T_e \tag{1}\]
Further, the engine torque is transmitted through the gearbox, where is multiplied with the gear ratio of the engaged gear ix [-] and outputs the gearbox torque Tg [Nm].
\[T_g = i_x \cdot T_e \tag{2}\]
The propeller shaft is transmitting the torque to the rear axle, where is multiplied with the final drive gear ratio i0 [-]. This gives the torque at the differential Td [Nm].
\[T_d = i_0 \cdot T_g \tag{3}\]
If the vehicle is driven on a straight line, the torque at the differential is equally split between the left wheel Tlw [Nm] and the right wheel Trw [Nm].
\[T_{lw} = T_{rw} = \frac{T_d}{2} \tag{4}\]
Image: Vehicle rear-wheel drive (RWD) powertrain schematic
The sum of the left and right wheel torque gives the torque at the differential.
\[T_{lw} + T_{rw} =T_d \tag{5}\]
Replacing (2) in (3) in (4) gives the mathematical expression of the wheel torque function of the engine torque, for a given gearbox ratio ix and a final drive ratio i0.
\[\bbox[#FFFF9D]{T_w = \frac{i_x \cdot i_0 \cdot T_e}{2} }\tag{6}\]
If we consider nw [-] as the number of driving wheels, then the wheel torque formula will have the general form of:
\[\bbox[#FFFF9D]{T_w = \frac{i_x \cdot i_0 \cdot T_e}{n_{w}} }\tag{6.1}\]
If the vehicle is rear wheel drive (RWD) or front wheel drive (FWD) then nw = 2, if the vehicle is four wheel drive (4WD) or all wheel drive (AWD) the nw = 4. If the vehicle is a motorcycle then nw = 1.
The formula of the wheel torque (6) applies to a vehicle which is driven on a straight line, where the left wheel torque is equal with the right wheel torque.
\[T_{lw} = T_{rw} = T_w \tag{7}\]
From mechanics (static), we know that the torque is the product between a force and its lever arm length. In our case, the wheel torque is applied in the wheel hub (center) and the lever arm is the wheel radius rw [m]. For this example we assume that both wheel have the same radius rw.
\[T_{lw} = F_{lw} \cdot r_w \tag{8}\]
The same principle applies to the right wheel torque.
\[T_{rw} = F_{rw} \cdot r_w \tag{9}\]
Assuming that both left and right wheel torque and radius are equal, we can write a generic expression of the wheel force Fw [N], function of wheel torque Tw [Nm] and wheel radius rw [m].
\[T_{w} = F_{w} \cdot r_w \tag{10}\]
From (10) we can extract the formula of the wheel force function of the wheel torque and wheel radius.
\[\bbox[#FFFF9D]{F_{w} = \frac{T_w}{r_w}} \tag{11}\]
Replacing (6) in (10) will give the mathematical expression of the wheel force function of engine torque, gearbox gear ratio, final drive ratio and wheel radius.
\[\bbox[#FFFF9D]{F_{w} = \frac{i_x \cdot i_0 \cdot T_e}{2 \cdot r_w}} \tag{12}\]
For a different number of driving wheels nw [-], the general formula for wheel force becomes:
\[\bbox[#FFFF9D]{F_{w} = \frac{i_x \cdot i_0 \cdot T_e}{n_{w} \cdot r_w}} \tag{12.1}\]
Example 1. Calculate the wheel torque and force for a rear wheel drive vehicle (RWD) with the following parameters:
- engine torque, Te = 150 Nm
- gearbox (1st) gear ratio, ix = 4.171
- final drive ratio, i0 = 3.460
- tire size marking 225/55R17
Step 1. Calculate the (free static) wheel radius from the tire size marking. The method for calculating the wheel radius is described in the article How to calculate wheel radius. The calculated wheel radius is rw = 0.33965 m.
Step 2. Calculate the wheel torque using equation (6).
\[T_w = \frac{i_x \cdot i_0 \cdot T_e}{2} = \frac{4.171 \cdot 3.460 \cdot 150}{2} = 1082.3745 \text{ Nm}\]
Step 3. Calculate the wheel force using equation (11).
\[F_{w} = \frac{T_w}{r_w} = \frac{1082.3745}{0.33965} = 3186.7349 \text{ N} \]
Example 2. For a given gearbox, with multiple gears (gear ratios), we can calculate the wheel torque and force for each gear. Let’s calculate the wheel torque and force for a vehicle with the following parameters:
- engine torque, Te = 150 Nm
- wheel radius, rw = 0.33965 m
The gearbox is automatic (ZF6HP26), with the following gear ratios and final drive ratio.
Gear # | Gear ratio symbol | Gear ratio |
1 | i1 | 4.171 |
2 | i2 | 2.340 |
3 | i3 | 1.521 |
4 | i4 | 1.143 |
5 | i5 | 0.867 |
6 | i6 | 0.691 |
Final drive | i0 | 3.460 |
To speed up calculations, we can use a Scilab script.
clc// Input dataTe = 150;ix = [4.171 2.340 1.521 1.143 0.867 0.691];i0 = 3.460;rw = 0.33965;nw = 2;// Wheel torque and force calculationTw = (ix .* i0 .* Te)/nw;Fw = Tw ./ rw;// Display resultsmprintf("\n%s\t\t%s\t\t%s\t\t%s\n","Gear","ix [-]","Tw [Nm]","Fw [N]")for i=1:length(ix) mprintf("%d\t\t%.3f\t\t%.2f\t\t%.2f\n",i,ix(i),Tw(i),Fw(i));end
Executing the above script will output the following results in the Scilab console:
Gearix [-]Tw [Nm]Fw [N]14.1711082.373186.7322.340607.231787.8131.521394.701162.0841.143296.61873.2850.867224.99662.4160.691179.31527.94
Example 3. For our third example we are going to use the full load torque curve of an engine and calculate the wheel torque and force (traction) in each gear. Calculate the wheel torque and force (traction) for a vehicle with the following parameters:
- engine torque, Te = 150 Nm
- wheel radius, rw = 0.33965 m
- the gear ratios of ZF6HP26 (see Example 2)
The engine torque at full load is given by the following parameters:
Ne [rpm] | 800 | 1312 | 1800 | 2276 | 2800 | 3316 | 3806 | 4300 | 4770 | 5300 | 5800 | 6300 |
Te [Nm] | 116 | 135 | 148 | 157 | 165 | 172 | 178 | 184 | 188 | 187 | 183 | 171 |
where Ne is engine speed and Te is engine torque.
The graphical representation of the engine speed and torque points is depicted in the image below.
Image: Engine torque at full load function of engine speed
Since we need to perform a lot of calculations, we’ll use a Scilab script to calculate the wheel torque and force curves for each gear. The results are going to be plotted in a graphical window.
clc// Input dataNe = [800 1312 1800 2276 2800 3316 3806 4300 4770 5300 5800 6300];Te = [116 135 148 157 165 172 178 184 188 187 183 171];ix = [4.171 2.340 1.521 1.143 0.867 0.691];i0 = 3.460;rw = 0.33965;nw = 2;// Plot engine torquefigure(1)hf = gcf();hf.background = 8;plot(Ne,Te,"LineWidth",2)xgrid()xlabel("Engine speed [rpm]","FontSize",3)ylabel("Engine torque [Nm]","FontSize",3)title("x-engineer.org","Color","blue","FontSize",2)// Calculate wheel torque and forcefor i = 1:length(ix) for j = 1:length(Te) Tw(i,j) = (ix(i) .* i0 .* Te(j))/nw; Fw(i,j) = Tw(i,j) ./ rw; endend// Plot wheel torque and forcefigure(2)hf = gcf();hf.background = 8;plot(Ne,Tw,"LineWidth",2)xgrid()xlabel("Engine speed [rpm]","FontSize",3)ylabel("Wheel torque [Nm]","FontSize",3)title("x-engineer.org","Color","blue","FontSize",2)legend("1st gear","2nd gear","3rd gear","4th gear","5th gear","6th gear",2)figure(3)hf = gcf();hf.background = 8;plot(Ne,Fw,"LineWidth",2)xgrid()xlabel("Engine speed [rpm]","FontSize",3)ylabel("Wheel force [N]","FontSize",3)title("x-engineer.org","Color","blue","FontSize",2)legend("1st gear","2nd gear","3rd gear","4th gear","5th gear","6th gear",2)
Executing the script will output the following graphical windows.
Image: Wheel torque at full load function of engine speed and gear
Image: Wheel force at full load function of engine speed and gear
The same method can be applied for an electric vehicle, the engine torque being replaced by the motor torque.
You can also check your results using the calculator below.
Wheel torque calculator
Te [Nm] | ix [-] | i0 [-] | rw [m] | nw [-] |
Tw [Nm] = | ||||
Fw [N] = |
Don’t forget to Like, Share and Subscribe!